Asahi Optical Co., Ltd. was founded by Kumao Kajiwara in 1919 in Japan and became one of the leading manufacturers of photo cameras and lenses. The production of photo lenses started in 1931 but the true success came to Asahi only in 1951 when Asahiflex — first Japanese 35 mm SLR camera — came out. First Takumar lenses for Asahiflex camera had M37 thread mount, after some time the M37 thread was replaced by M42 and the lenses with M42 mount were produced till 1975 when threaded mount was abandoned due to release of the new Pentax system based on K bayonet mount.
The Asahi Macro-Takumar 1:4/100 is a full-frame manual macro lens which exists in several incarnations:
- Bellows-Takumar (1966-1971) – pre-set aperture, weight 139 g;
- Super-Multi-Coated Bellows-Takumar (1971-1976) – multicoated, allows metering without preliminary closing the diaphragm to shooting aperture. Other characteristics are the same of Bellows-Takumar’s;
- Super-Multi-Coated Macro-Takumar (1975-1976) – auto aperture, weight 350 g. Other characteristics are the same of Super-Multi-Coated Bellows-Takumar’s.
- smc Pentax (1975-1977) – has the best build quality among the smc Pentax lenses. Optically it’s the same;
- smc Pentax-M (1977-1984) — the build quality is also very high but both the length and weight of the housing are slightly reduced;
- smc Pentax-A (1984-1989) — has automatic aperture which can be controlled from the camera.
Autofocus version for Pentax K mount does not exist.
In 1980-90s the Pentax Corporation «resurrected» Takumar brand for the series of single-coated budget lenses. Such lenses were marked as Takumar (Bayonet) to distinguish them from the old threaded ones. Thanks God, Macro-Takumar 1:4/100 does not exist in such variation.
So, we have determined that our sample of Super-Multi-Coated Macro-Takumar 1:4/100 is the ultimate version in the line of Asahi M42 lenses. In this review the lens was used with the Fujifilm X-Pro1 camera with a crop factor of 1.53, and the effective focal length of the lens «became» 153 mm (full-frame equivalent). The lens was used via M42 — Fuji X adapter without chip. There was no focus confirmation, but the metering was performed by the camera automatically in the stop-down mode. All you have to do is just to select the desired aperture and rotate the manual focus ring until you have your subject sharp in the EVF or LCD in Live View mode.
Build Quality and Characteristics
The build quality of the lens is great (in fact, this is pretty typical for the most lenses of 1970s) and is not comparable not only to the modern high-quality plastic lenses, but even to the all-metal Pentax Limited series of lenses. The black housing of the lens is big, completely made of metal, including thread mount, has the moderate weight of 350 g and a length of 81.5 mm (when focused on the infinity; not including the caps).
The manual focus ring is wide, has width of 44 mm, well damped, has no play, rotates smoothly and with proper resistance. The condition of various control elements of the lens depends on the year of manufacture and the level of preservation of a particular lens. The angle of rotation of the ring is very big (approximately 330 degrees) and more than sufficient to provide very accurate focusing. The front element is pushed forward by 50 mm when focusing on the minimum distance of 23.4 cm. There is a distance scale and depth of field scale of course. Furthermore, the upper part of the manual focusing ring has maginfication scale marks. If you set the distance scale at the minimum focus of 50 cm, you could obtain the magnification ratio of 1:2. With further rotation of the manual focusing ring towards infinity the magnification ratio changes nonlinearly: at ~54 cm it’s 1:3, at ~73 cm — 1:5, at 120 cm — 1:10, at 300 cm — 1:25.
The aperture ring has the following markings: 4 — 5.6 — 8 — 11 — 16 — 22. There are half stops between F/5.6 and F/16 but they are not indicated on the scale. The aperture works in manual and automatic modes, there is a corresponding switch on the rear part of the housing. The switch is irrelevant for today’s digital cameras.
The aperture has 6 blades, its opening is not circular, but this is not so surprising, because the production of the lenses with a circular aperture started only in 1987 by the Minolta Corporation — 12 years after withdrawal of Asahi Takumar lenses from the production. All smc Pentax versions of this lens have the same number of aperture blades.
The diameter of the filter thread is 49 mm — a common size among Asahi (Pentax) lenses. The filter thread does not rotate when focusing, making it easy to use polarizing and gradient filters. No filters were used during shooting for this review. As for the hood, the lens does not really need it because the front element of the lens is recessed in the housing.
Optically the lens is pretty simple and consists of 5 elements in 3 groups. The optical elements of the reviewed lens have no any noticeable yellow cast (a common characteristic of many Asahi Super-Takumar lenses).
The lens exhibits excellent sharpness and overall contrast in the center and in the corners of the frame already from F/4. The sharpness and overall contrast visually does not increase with further closing of the aperture. The depth of field at F/4 is narrow even on APS-C sensor and if you want, you could achieve truly impressive separation of the main subject from the background. But please be informed that focusing handheld at minimum focus distance is very difficult because even the slightest movement of the hand is pretty enough for the sharpness to be lost. Fortunately there are no problems when shooting at the infinity.
Vignetting is not noticeable with APS-C sensor, the same goes to distortion and lateral chromatic aberration.
The quality of the bokeh is very good. The background blur is soft and it is possible to achieve a very smooth transition between the foreground and background blur. The degree of blurring, however, also depends on the distance between the front element of the lens and the subject, the distance between the subject and the background.
The out-of-focus highlights are round and evenly rendered at F/4 but become hexagons starting from F/5.6. However, you should understand that you have to close the aperture up to F/16 or even F/22 when shooting with macro lenses and the depth of field at such apertures will be so wide that you won’t have any chance to see pentagons in your photos.
Longitudinal chromatic aberration (colored halos in front of the focus point and in the background) are virtually absent.
Solely because of my curiosity I tested the lens for the resistance to flares. There are no problems at F/4 but the small green blob appears with further closing of the aperture and the intensity of the blob grows with the each stop of the aperture. However you should understand that this was an extreme case of use of the lens — it was aimed directly at the sun penetrating the moderately dense foliage. It’s pretty hard to imagine that somebody will always shoot in such manner with a macro lens.
The Asahi Super-Multi-Coated Macro-Takumar 1:4/100 is an excellent macro lens. Mechanically and optically the lens does not leave to be desired for anything more — the lens is ergonomic, easy to use and very sharp all over the APS-C frame at any given aperture. The background blur is soft and smooth even taking into account that this is not a fast lens. There are no visible optical aberrations with the APS-C sensor. The maximum magnification ratio of 1:2 is the same as that of some of modern macro lenses with similar focal length of 90 mm.
If you will ask me how can you compare this lens with 1:4/50 model, then, in my opinion, the image quality that can be obtained when using these macro lenses is more or less the same. Thanks to twice the minimum focusing distance the 1:4/100 model is better suited for professional macro shooting: the housing of the lens does not cast a shadow on the subject and is far enough to not to scare the insects and make them run away from the frame.
Author of the review and photos: Evgeny Artemov, firstname.lastname@example.org