A subjective look at Asahi Super-Multi-Coated Macro-Takumar 1:4/50 M42 @ Fujifilm X-Pro1

Asahi Optical Co., Ltd. was founded by Kumao Kajiwara in 1919 in Japan and became one of the leading manufacturers of photo cameras and lenses. The production of photo lenses started in 1931 but the true success came to Asahi only in 1951 when Asahiflex — first Japanese 35 mm SLR camera — came out. First Takumar lenses for Asahiflex camera had M37 thread mount, after some time the M37 thread was replaced by M42 and the lenses with M42 mount were produced till 1975 when threaded mount was abandoned due to release of the new Pentax system based on K bayonet mount.

Asahi Macro-Takumar 1:4/50 is a full-frame manual macro lens which exists in several incarnations:

  • Macro-Takumar (1966-1969) – has pre-set aperture with 8 blades, minimum focus distance of 20.8 cm and weight of 265 g. Allows close-up shooting at a magnification ratio of 1:1 (life-sized reproduction);
  • Super-Macro-Takumar (1969-1971) — has early type of coating, allows to select manual or automatic aperture mode by a special switch on the housing. Only 5 aperture blades, minimum focus distance of 23.4 cm, weight 248 g. Close-up shooting at magnification ratio of 1:2 «only»;
  • Super-Multi-Coated Macro-Takumar (1971-1979) – multicoated, allows metering without preliminary closing the diaphragm to shooting aperture. Other characteristics are the same of Super-Macro-Takumar’s.
  • smc Pentax (1975-1977) – has the best build quality among the smc Pentax lenses. Optically the same as the Super-Macro-Takumar;
  • smc Pentax-M (1977-1984) — the build quality is also very high but both the length and weight of the housing are slightly reduced. Optically the same as early smc Pentax/Super-Macro-Takumar.

Automatic aperture version of smc Pentax model does not exist because the Pentax Corporation choosed to produce a more ambitious macro lens with the same focal length of 50 mm but with a F/2.8 aperture.

In 1980-90s the Pentax Corporation «resurrected» Takumar brand for the series of single-coated budget lenses. Such lenses were marked as Takumar (Bayonet) to distinguish them from the old threaded ones. Thanks God, Macro-Takumar 1:4/50 does not exist in such variation.

So, we have determined that our sample of Super-Multi-Coated Macro-Takumar 1:4/50 is the ultimate version in the line of Asahi M42 lenses. In this review the lens was used with the Fujifilm X-Pro1 camera with a crop factor of 1.53, and the effective focal length of the lens «became» 76.5 mm (full-frame equivalent). The lens was used via M42 — Fuji X adapter without chip. There was no focus confirmation, but the metering was performed by the camera automatically in the stop-down mode. All you have to do is just to select the desired aperture and rotate the manual focus ring until you have your subject sharp in the EVF or LCD in Live View mode.

Asahi Super-Multi-Coated Macro-Takumar 1:4/50

Build Quality and Characteristics

The build quality of the lens is great (in fact, this is pretty typical for the most lenses of 1970s) and is not comparable not only to the modern high-quality plastic lenses, but even to the all-metal Pentax Limited series of lenses. The black housing of the lens is completely made ​​of metal, including thread mount, has the light weight of 248 g and a length of 59 mm (when focused on the infinity; not including the caps).

Asahi Super-Multi-Coated Macro-Takumar 1:4/50
Asahi Super-Multi-Coated Macro-Takumar 1:4/50

The manual focus ring has width of 21mm, is well damped, has no play, rotates smoothly and with proper resistance. The condition of various control elements of the lens depends on the year of manufacture and the level of preservation of a particular lens. The angle of rotation of the ring is very big (approximately 340 degrees) and more than sufficient to provide very accurate focusing. The front element is pushed forward by 24-25 mm when focusing on the minimum distance of 23.4 cm. There is a distance scale and depth of field scale of course. Furthermore, the upper part of the manual focusing ring has maginfication scale marks. If you set the distance scale at the minimum focus of 23.4 cm, you could obtain the magnification ratio of 1:2. With further rotation of the manual focusing ring towards infinity the magnification ratio changes nonlinearly: at ~28 cm it’s 1:3, at ~37 cm — 1:5, at 60 cm — 1:10, at 150 cm — 1:25.

Asahi Super-Multi-Coated Macro-Takumar 1:4/50

The aperture ring has the following markings​​: 4 — 5.6 — 8 — 11 — 16 — 22. There are half stops between F/4 and F/16 but they are not indicated on the scale. The aperture works in manual and automatic modes, there is a corresponding switch on the rear part of the housing. The switch is irrelevant for today’s digital cameras.

Asahi Super-Multi-Coated Macro-Takumar 1:4/50

The aperture has only 5 blades, its opening is not circular, but this is not so surprising, because the production of the lenses with a circular aperture started only in 1987 by the Minolta Corporation — 12 years after withdrawal of Asahi Takumar lenses from the production. Both smc Pentax and smc Pentax-M versions of this lens have the same number of aperture blades.

The diameter of the filter thread is 49 mm — a common size among Asahi (Pentax) lenses. The filter thread does not rotate when focusing, making it easy to use polarizing and gradient filters. No filters were used during shooting for this review. As for the hood, the lens does not really need it because the front element of the lens is deeply recessed in the housing.

Asahi Super-Multi-Coated Macro-Takumar 1:4/50

Optically the lens is pretty simple and consists of 4 elements in 3 groups. The optical elements of the reviewed lens have no any noticeable yellow cast (a common characteristic of many Asahi Super-Takumar lenses).

If the optical elements of your copy of the lens are yellow, the yellowness (which, by the way, gives some ‘warmth’ to the image) could be corrected during post-processing. The original color of the optical coating can be recovered if the lens is subjected to prolonged exposure to the ultraviolet light with a special lamp (it takes several hours or even days of continuous exposure). After this procedure, the lens will be sharper across the frame, the focus confirmation in the viewfinder with the respective cameras will be more accurate, the images will be correctly exposed.

Optical Results

The lens exhibits excellent sharpness and overall contrast in the center and in the corners of the frame already from F/4. The sharpness and overall contrast visually does not increase with further closing of the aperture. The depth of field at F/4 is narrow even on APS-C sensor and if you want, you could achieve truly impressive separation of the main subject from the background. But please be informed that focusing handheld at minimum focus distance is very difficult because even the slightest movement of the hand is pretty enough for the sharpness to be lost. Fortunately there are no problems when shooting at the infinity.

Vignetting is not noticeable with APS-C sensor, the same goes to distortion and lateral chromatic aberration.

The quality of the bokeh is very good. The background blur is soft and it is possible to achieve a very smooth transition between the foreground and background blur. The degree of blurring, however, also depends on the distance between the front element of the lens and the subject, the distance between the subject and the background.

The out-of-focus highlights are round and evenly rendered at F/4 but become pentagons starting from F/5.6. However, you should understand that you have to close the aperture up to F/16 or even F/22 when shooting with macro lenses and the depth of field at such apertures will be so wide that you won’t have any chance to see pentagons in your photos.

Longitudinal chromatic aberration (colored halos in front of the focus point and in the background) are virtually absent.

Solely because of my curiosity I tested the lens for the resistance to flares. There are no problems at F/4 but the small green blob appears with further closing of the aperture and the intensity of the blob grows with the each stop of the aperture. However you should understand that this was an extreme case of use of the lens — it was aimed directly at the sun penetrating the moderately dense foliage. It’s pretty hard to imagine that somebody will always shoot in such manner with a macro lens.


Summary

The Asahi Super-Multi-Coated Macro-Takumar 1:4/50 is an excellent macro lens. Mechanically and optically the lens does not leave to be desired for anything more — the lens is ergonomic, easy to use and very sharp all over the APS-C frame at any given aperture. The background blur is soft and smooth even taking into account that this is not a fast lens. There are no visible optical aberrations with the APS-C sensor. The maximum magnification ratio of 1:2 is the same as that of most of modern macro lenses with similar focal lengths of 40-60 mm.

If you will ask me how can you compare this lens with 1:4/100 model, then, in my opinion, the image quality that can be obtained when using these macro lenses is more or less the same. Thanks to twice the minimum focusing distance the 1:4/100 model is better suited for professional macro shooting: the housing of the lens does not cast a shadow on the subject and is far enough to not to scare the insects and make them run away from the frame.

Author of the review and photos: Evgeny Artemov, eugene.artemov@mail.ru

Your comment

Being unregistered user or not logged in user you won't get any email notifications about replies on this comment.

Copy this code

and paste it here *